Description
NeuroTrac® Continence Is a Digital Dual Channel STIM unit suitable for
- pelvic floor muscle strengthening
- urinary and faecal incontinence
- bladder frequency and urgency,
- lack of sensitivity of pelvic floor
- pelvic floor workout – combining several phases and parameters
- pain relief
- muscle strength and endurance.
The NeuroTrac® Continence has 9 built in programmes and 3 customisable, work/rest programmes which are simple to set up.
NeuroTrac® Continence EMS (electrical muscle stimulation) units are widely used by physiotherapists in their practices and you can now bring the same technology to the privacy of your own home, in a simple, user-friendly compact and reliable stimulation device.
The NeuroTrac Continence  records the average current used plus the time in use along with the ability to lock the unit.
What is included?
- Continence electrical stimulation unit
- 9V Battery
- 2 lead wires ( connects electrodes to unit)
- User manual
- Soft storage case
Women can use electrical stimulation with either anal, vaginal or external electrodes. Men can use electrical stimulation with anal or external ele
WHAT IS INCLUDED?
- Continence electrical stimulation unit
- 9V Battery
- 2 lead wires ( connects electrodes to unit)
- User manual
- Soft storage case
SPECIFICATIONS
STIMULATION
- Dual channel: individually isolated circuits.
- Amplitude: 0 – 90 mA into 500 Ohm load; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
- Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts
- Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.
- Selectable pulse width: 50 μS – 450 μS [2% accuracy].
- Pulse Rate selection: in the continuous mode 2 Hz – 100 Hz [2% accuracy].
- Time duration of the treatment selectable: 1 minute to 90 minutes.
- Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
- Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.
- Ramp up time 0.3 – 9.9 seconds.
- If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.
Physical dimensions:Â 119.2 x 69 x 28.7 mm
Weight:Â 0.07KG without battery, 0.1KG with battery.
Environmental Conditions for use:
+10 to +30 degrees Centigrade. 0-90% Humidity.
Environmental conditions for storage & transport:
10 to +50 degrees Centigrade. 0-90% Humidity.
Reviews
There are no reviews yet.